fukuda tv user manual

For sure, many tech experts will try to help resolve the issue, although it might take some time for you to receive some answers. Their customer care representatives are always ready to assist you with your concerns; just be sure to prepare key details, such as your LED TV model and your receipt containing the purchase date and the store location. They might need these to help you resolve the issue. It could help the representative determine the correct issue as well as provide you with the right solution. Usually, they also have representatives there that are always available to aid you resolve your LED TV problems. Your supplier would either advise you to bring your TV to the company-authorized service center, or to schedule for a home visit by a technician. Check if your unit is still covered under warranty. Just be sure to keep your receipt with you because warranties depend on the date that you have bought your TV. Most warranties cover only factory defects. If the cause of the defect is not covered by the warranty, you can still have your unit repaired but with corresponding fees. For sure, they will be quite willing to explain it in detail with you. However, they are still prone to breaking and defects. If this happens, you could turn to the solutions listed above. Once the issue has been fixed, you could prevent it from happening again by following good maintenance tips for your TV. This could ensure that the issue will never occur once again. For more information and a list of LED TV sets and other appliances and devices from Fukuda, you can visit this page. However, if you want to have your Fukuda LED TV repaired or if you have other concerns, you can always visit the Customer Care page here. Whatever you need, there is a Fukuda appliance for you. Search results for: (found: ) ask for a document File Date Descr Size Popular Mfg Model: Found in chassis2model: Found in repair tips.

• fukuda tv user manual, fukuda tv user manual, fukuda tv user manual pdf, fukuda tv user manual download, fukuda tv user manual free, fukuda tv user manual 2017.

Login to post If a search through all codes stored in the remote fails, you may have to try a different universal remote. All universal remotes do not store all possible codes.If a search through all codes stored in the remote fails, you may have to try a different universal remote. All universal remotes do not store all possible codes.Please provide the make and model of your universal remote so might help yo to do a google search for manual with codes. You don't have any remote. Go to the neares elecroicshop, retail store, home depot, etc and you'll get one. Try to have a look at the maual before you buy it, to search for your Fukuda. Procedure is different for each make and model See a tyoical manual - btw, this one doesn't carry Fukuda.All the keys are in Japanese words would u please send me the English version words. Thanks It will have all details.What is the fault and what should I do. Thank you. Answer questions, earn points and help others. However, all the fun and games could get ruined when your LED TV stops working. But do not worry! Usually, the power cables just are not connected well, or maybe the plug is too loose or the socket is just malfunctioning. In this case, try plugging your TV into a different electric outlet. However, do not mess with it if it looks damaged since you might get electrocuted. Remember, your life is not worth the latest episode of “Game of Thrones.” However, keep in mind that you should not open or dismantle your LED TV because this will void your warranty. The internet is usually a good place to find useful information, especially since chances are high that people have already experienced most issues that LED TVs have. You will also be surprised at how many of these people post their solutions for everyone to see. Simply do a Google search that will lead you to online forums with these solutions. From there, it is as simple as looking on the page for a solution to your problem.

Cautions described here are regarding the general instructions for safety useAs for cautions about the LX-7120, please referPay attention to the following when installing or storing theBefore operating the equipment, verify the following items.Especially,During operation of the equipment, verify the following items.If the equipment is damaged and in need of repair, ensure patientUser should not attemptDenshi representative. Do not remodel the equipment. Maintenance CheckWhen using electrosurgical knives or defibrillator with thisAlso, verify that a proper ground is selected.Non-Explosion ProofIt may cause an explosion or fire.It may cause an explosionThe local heating caused by the induced electromotive force may causeFor details, refer to the operationElectrosurgery SafetyIf the connection isDefibrillation SafetyIf used by unspecified lead cable, the device may be damaged, resultingIf this is not possible, removeIf the defibrillator paddles are directly in contact with the electrodes orElectric shock may result from the dischargedIf such event occurs, please disconnect the cardiac monitoring andReferenceFDA alerts health professionals that minute ventilation rate-adaptiveDo not rely entirely uponPrecautions about the LX-7120If not regularly replaced, theIf the LX-7120 is dropped orAlways wipe the LX-7120 with a soft clothPrecautions about ECGOtherwise, it mayIn this case,Precautions about Output SignalDenshi for the LX-7120. Otherwise, the LX-7120 cannot deliver itsPrecautions about BatteryAny attempt to charge the battery may causeIt may result in exothermic heatIt may explode. Precautions about Disposing of Equipment, Accessories, or. ComponentsDo not dispose of as ordinary waste.Precautions about Disposing of BatteryExposure Guidelines in Supplement C to OET65. The LX-7120 has veryService.The medical institution (hereinafter referred to as the “Institution”) mustWhen telemetry has alreadyInstitution.

Discover everything Scribd has to offer, including books and audiobooks from major publishers. Start Free Trial Cancel anytime. Report this Document Download Now Save Save Fukuda Sangyo ST-95 Spiroanalyzer - User manual.pd. For Later 0 ratings 0% found this document useful (0 votes) 18 views 66 pages Fukuda Sangyo ST-95 Spiroanalyzer - User manual.pdf Uploaded by luis Description: Full description Save Save Fukuda Sangyo ST-95 Spiroanalyzer - User manual.pd. For Later 0% 0% found this document useful, Mark this document as useful 0% 0% found this document not useful, Mark this document as not useful Embed Share Print Download Now Jump to Page You are on page 1 of 66 Search inside document Browse Books Site Directory Site Language: English Change Language English Change Language. Keep this manual near the device for future reference.System equipment are cautioned that the operation of this equipmentNo part of this document may be copied or transmitted in any form without the priorPrinted in JapanBefore use, read this operation manual thoroughly for correct handlingSafety PrecautionsPrecaution from Fukuda Denshi. Fukuda Denshi is liable for the safety, reliability, and performance of its deviceIf the equipment is used incorrectly and become unusable, Fukuda Denshi isUse the equipment only for the purpose specifiedRefer to the following symbols indicated on the LX-7120 for their meanings. Symbols indicated on the main unit. Description. Symbol. Caution; read the operation manual. Indicates the need to refer to the operation manual beforeType CF Applied Part with Defibrillation-Proof. Indicates that the degree of protection against electricIndicates the battery type and direction. Symbols indicated on the LCD screen. Heart Rate Synchronization Mark. This mark flashes synchronizing with the heartbeat. Battery Mark. Indicates the remaining battery level.

Electromagnetic propagation isField strengths from fixed transmitters, such as base stations for radioTo assess the electromagnetic environment due to fixed RF transmitters, anIf the measured field strength inOver the frequency range 150kHz to 80MHz, field strength should be less thanMobile RF Communications Equipment and the LX-7120. The LX-7120 is intended for use in an environment in which radiated RFThe customer or the user of the LX-7120 can helpRated Maximum Separation Distance according to Frequency of Transmitter (m). Output Power ofTransmitterNote 1: At 80MHz and 800MHz, the separation distance for the higher frequency rangeNote 2: These guidelines may not apply in all situations. Electromagnetic propagationPrecaution from Fukuda Denshi. i. Equipment Symbols.ii. Precautions for Safe Operation of Medical Electrical Equipment.iii. Non-Explosion Proof.iv. Precautions about Magnetic Resonance Imaging (MRI). v. Electrosurgery Safety. v. Defibrillation Safety. v. Precautions about the Pacemaker.vi. Precautions about the LX-7120.vi. Precautions about Waterproof.vii. Precautions about ECG.vii. Precautions about Output Signal.vii. Precautions about Accessories and Optional Accessories. viii. Precautions about Battery. viii. Precautions about Disposing of Equipment, Accessories,Precautions about Disposing of Battery. viii. Precautions for Use of Medical Telemeter.ix. Electromagnetic Compatibility.xi. Precautions for Safe Operation under Electromagnetic Influence.xi. EMC Guidance.xiiThe LX-7120 is a radio telemetry transmitter designed to measure the ECGInformation such as ECG measurements, respiration waveform, battery level,ECG lead selection is available using the two buttons (Enter and ?) on theBefore using the LX-7120, read also the operation manual of the patientExternal AppearanceBlank PageChannel Number Label. Indicates transmitterNeck Strap Hole. Attaches the neck strap. Connects the ECG lead cableEnter button. Uses for setup. Refer to “Safety.

However, when using suchWhen changing a wirelessManager or to the user.The performance of this device under electromagnetic environment compliesPrecautions for Safe Operation under Electromagnetic InfluenceThe following are examples of the common cause and countermeasures.The radio wave may cause malfunction to the device. Cellular phones and radio sets should be turned off in the roomIn a dry environment (room), static electricity is likely to occur. TakeThis equipment complies with IEC 60601-1-2 (2007). However, if portableTherefore, this equipment should be used in a location specified by eachThe following is the information relating to EMC (Electromagnetic. Compatibility).The LX-7120 is intended for use in the electromagnetic environment specifiedEmission Test. Compliance. RF EmissionRF EmissionClass A. Guidance. The LX-7120 uses RF energy only for itsThis LX-7120 is suitable for use in allThe LX-7120 is intended for use in the electromagnetic environment specifiedImmunity Test. Electrostatic. DischargeCompliance. Level. Electromagnetic. Environment. Floors should bePower frequencyNote: UT is the AC mains voltage prior to application of the test level. Power. Frequency. Magnetic FieldThe LX-7120 is intended for use in the electromagnetic environment specifiedImmunity. Test. IEC60601-1-2 Complianc Electromagnetic Environment. Test LevelGuidance. Portable and mobile RFLX-7120, including cables, than theRecommended Separation Distance. Conducted RFRadiated RFP 80MHz to 800MHz. P 800MHz to 2.5GHz. Where P is the maximum outputField strengths from fixed RFInterference may occur in the vicinityNote 1: At 80MHz and 800MHz, the higher frequency range applies. Note 2: These guidelines may not apply in all situations.

The descriptions of contents displayed on the LCD are as follows. Indicates ECG 1. Indicates the scale of the displayedIn the left illustration, it can display. ECG waveform between -1mV and. Displays the ECG waveform. Displays the heart rate.Displays the detection marker whenIndicates the measuring lead. Indicates the ECG waveform sizeIf the ECG waveform size displayed on theIndicates the remaining battery level. For details of the battery level, refer toDisplays the electrode checkECG2 waveform, heart rate, pacemaker marker, remaining battery level, andThe LCD display will automatically turn itself OFF after 60 seconds if noWhen the LCD display is active, press the.The descriptions of contents displayed on the LCD are as follows. Indicates ECG 2. Indicates the scale of the displayedIn the left illustration, it can display ECG. Displays the heart rate.Displays the detection marker when theIndicates the measuring lead. Indicates the ECG waveform sizeIf the ECG waveform sizeIndicates the remaining battery level. For details of the battery level, refer toDisplays the electrode checkRespiration waveform, respiration rate, remaining battery level, and electrodeThe LCD display will automatically turn itself OFF after 60 seconds if noWhen the LCD display is active, press the.The descriptions of contents displayed on the LCD are as follows. Indicates the respiration waveformIndicates the scale of the displayedOne scale corresponds to 1. In the left illustration, it can displayDisplays the respiration waveform. Displays the respiration rate. Indicates the respiration waveformIf the respiration waveform sizeIndicates the remaining battery level. For details of the battery level, refer toDisplays the electrode checkBlank PageIn the ECG display screen (1), the ECG waveform size and lead displayed onHow to enter the setup mode. Press and hold the Enter button for 2 seconds in the ECG display screen (1).

Lead of ECG 1 can be switched when 3-electrode lead cable or 5-electrodeSelect an appropriate lead by checking the ECG waveform on the LCD. The lead indication of ECG 1 isPressing the Enter button willPress the ? button to highlightPressing the Enter button willECG waveform on the LCD, the. ECG scale will also change. In the left illustration, it canIf the ECG waveform size displayedPress the ? button to highlightPress the Enter button to return toMake sure to pressThe LCD display willIn the ECG display screen (2), the ECG waveform size displayed on the LCDHow to enter the setup mode. Press and hold the Enter button for 2 seconds in the ECG display screen (2). The size indication of ECG 2 isPressing the Enter button willECG waveform on the LCD, the. In the left illustration, it canIf the ECG waveform size displayedPress the ? button to highlightPress the Enter button to return toIn the respiration display screen, the respiration waveform size displayed onHow to enter the setup mode. Press and hold the Enter button for 2 seconds in the respiration display screen. The size indication of thePressing the Enter button willWhen changing the size of theIn the left illustration, it canIf the respiration waveform sizePress the ? button to highlightPress the Enter button to return toMake sure to pressThe LCD display willThe LCD display will automatically turn itself OFF after 60 seconds if noPress the Enter button or press and hold the.The starting screen with telemetry channel number appears, and then thePress and hold the EVENT button for 2 seconds to activate the functionThe following message appears on the. LCD while the “EVENT” is transmitted. After the transmission is completed, the starting screen with the telemetryFor details of the receiving monitor operation and settings related to theBlank PageThe following settings are available for the LX-7120 depending on the use andFor details of the settings, contact our serviceItems. Time Constant. Detection Sensitivity of.

Precautions” in thisUses for setup. EVENT Button. Activates the functionBattery Compartment Lid. This is the lid for the batteryMake sure to close it when theBattery Lid Lock LeverPower Switch. Electrode Position Label. Indicates standard ECGBlank PageWith new battery, the LX-7120 is capable of approximately 6 days continuousIt may result in exothermicThe leakage from the battery may damage the device, or an explosionThe leakage from theIf the battery is leftOther battery will shorten the continuousLift the lock lever to open the batteryInstall new battery according to the polarityMake sure to first Insert the battery into theHook the lock lever on the projection fromTurning the power switch to “ON”. Rotate the power switch to the left until it clicks. LCD screen turns ON and measurement starts. Regarding the LCD screen, refer to page 17 (6. Measurement). The screen automatically turns itself OFF after a minute. After the power is turned ON, make sure to check the remaining battery levelRefer to the following symbol about the remaining battery level. Battery Symbol. Remaining Battery Level. Full. Getting low but still available. Nearly empty. Replace the battery. The battery level estimation is in case of using alkaline battery. Turning the power switch to “OFF”. Rotate the power switch to the right until it clicks.Blank PageThe optional ECG lead cables for LX-7120 are as follows. ECG Lead Cables. AHA color code. Item No. Applicable Lead. CMT-01HTH-0.8DA Limb Lead (1CH). CMT-02HTH-0.8DA Limb Lead (2CH)RemarkOtherwise, properThe relations between the attached electrode positions and lead method areFor 3-electrode lead cable. For AHA color code electrode position (No.Standard Limb leads can be selected from lead I, lead II, or lead III underFor 4-electrode lead cable. For AHA color code electrode position (No.Two leads measurements, lead I and II are fixed. Lead III, aVR, aVL, andFor 5-electrode (Chest) lead cable. For AHA color code electrode position (No.

One limb lead and one chest lead (Brown) measurements are available. Standard Limb leads can be selected from lead I, lead II, or lead IIIThe chest lead waveform is measured from the chest lead (Brown)If different types of electrodes areIt is intended for single patent useClean the electrode sites with alcohol wipesIf necessary, shavePeel off the disposable electrode. Pay attention not to touch the electrode gel. Attach the lead cable end to the electrodeTurn right and left to verify that it is securelyECG Lead cableIn this case,Therefore, there is a difference in the STPay attention to the differenceCheck the patient’s skinOtherwise, the waveformOtherwise, it mayFollow the preparation of “4.ECG Monitoring” to allow the respirationThis respiration monitoring is performed with impedance method. The ECG electrodes are also used for detecting the respiration. Each leadFor 3-electrode and 5electrode (chest) lead cable, the electrodes to detect the respiration are fixedLead CableColor of Electrode. White (RA) and Red (LL). White (RA) and Red (LL)The cardiacIf such event occurs, please disconnect the cardiac monitoring andReferenceFDA alerts health professionals that minute ventilation rate-adaptiveBlank PageTurn ON the power and the measurement starts. When the power is turned ON, the channel number configured on the LX-7120Make sure whether the channel number on the. LCD matches the channel number indicated onThis screen automatically moves onto the nextECG waveform (1CH when using 3-electrode lead cable, 2CH when usingCheck the diagnosticCheck the alarm functionLCD of the LX-7120 do not interface with the ones displayed on theBecause the algorithm of the ECG and respiration rate is different. Check the battery level on the waveform display screen. Battery. A message that prompts theECG1 waveform, heart rate, pacemaker marker, remaining battery level, andThe LCD display will automatically turn itself OFF after 60 seconds if noWhen the LCD display is active, press the.

Pacemaker Pulse. Respiration Detection. Signal. LCD Contrast. Transmitter Channel. Group ID. SelectionDefaultBackup. Yes. Low, Mid, High. Mid. YesYesOne from theOne from 00 to 63. The default setting of the time constant is “0.4 seconds”. If a stable monitoring is difficult with excessive change in the baseline due toFor details of the setting change, contact your local Fukuda Denshi serviceST measurement value may be especially affected. Fukuda DenshiThe default setting of pacemaker pulse detection sensitivity is “Mid”. The “Mid” setting can detect and reject the following pacemaker pulse. Capable to reject pulses of pulse width 0.1 to 2ms. Rejection is not possible. Fukuda Denshi recommends the “Mid” setting in normal use. There may be some cases when the pacemaker pulse cannot be detectedIn this case, change the lead or the position of theNonetheless, if the detection is still undetectable, change the setting to “High”So that smaller pacemaker pulseIf erroneous detections occur due to interference noise, such as AC frequency,If erroneous detections occur due to interference noise, such as AC frequency,Nonetheless, if erroneous detections still occur, change the setting to “Low” inIt makes the LX-7120 less likely toThe “Low” setting decreases the detection sensitivity. Therefore, it cannot. For details of the setting change, contact your local Fukuda Denshi serviceMake sure to take measures, such as markingThe default setting of the respiration detection signal is “ON”. The respiration waveform can be detected when the setting of the respirationIf such event occurs, change theFor details of the setting change, contact your local Fukuda Denshi serviceMake sure to take measures, suchThe LCD display contrast of the LX-7120 can be changed in 8 steps.

For details of the setting change, contact your local Fukuda Denshi serviceBlank PageThe LX-7120 is a transmitter of PLL synthesizer type, and its transmitterIt can be set up with an arbitrary channel amongFor details of the setting change, contact your local Fukuda Denshi serviceMismanagement may result in a serious accident, such as interferenceThe LX-7120 transmits its group ID, which it belongs to, to prevent interferenceThe receiving monitor checks whether the incoming group ID is the same asThere are 64 group codesThe transmitter group ID can be changed if there is interference with aFor details of the setting change, contact your local Fukuda Denshi serviceIn such a case, the situation should be carefully observed to find the causeBlank PageTransmitter (main unit). Message. Cause. Failed to transmitSolution. Contact your local Fukuda. Denshi serviceFaulty EEPROM. Failed to initializeCause. Electrode is off. Solution. Check the electrodeCharacter stringMake sure of the followings. However, if there is no improvement in theTransmitter (main unit). Phenomenon. Nothing is displayed. No battery or wrong Install the battery correctly.Battery level is. Replace the battery with aNothing is displayedThe channelTransmission problem. Same channelMake sure to not duplicateFollow the instruction by theChannelFollow the instruction by theTransmitter failure. Denshi serviceCauseSolution. Check the connectionCheck the connectionFaulty Lead cable. Replace the ECG cable withElectrode is peeling Replace the electrode with aPolarizationECG waveformRespiration waveformReplace the electrode with aElectrode gel is dry. Replace the electrode with a. Electrode is peeling new one.Electric blanket isCover the electric blanketAC filter setting ofSet the AC filter up as ON. Electrode gel is dry. Replace the electrode with aElectrode is peelingThe positions of the Attach the electrodes whereIn case of dropping the LX-7120 into water containing disinfectant, pick up the.

LX-7120 quickly from it. Rinse it well with running water, and dry it thoroughlyThe Cleaning and disinfection of the LX-7120 and ECG lead cable shall beClean the LX-7120 using a squeezed gauze or an absorbent cotton clothDo not use chemicalThe surfaceIf there is a possibility of being infected, clean the LX-7120 using a squeezedBlank PageThis section explains the daily checks and periodic checks of the LX-7120. To ensure safety, reliability, and high performance, a “Daily Check” andWe are not liable for any accident arisingThe service should be donePerform daily checks using the “Daily Check List” on the next page. Periodic check of medical electronic equipment is mandatory to preventPeriodic maintenance may be performed by the medical institution or by a thirdFor more details, contact your local Fukuda Denshi service representative. The “Battery Compartment Lid (Waterproof)” is the only periodicTo ensure the reliability of waterproof (IPX8) performance of the LX-7120,You may be able to keep using the LX-7120 without periodic replacement ofWhen replacing the lid, contact your local Fukuda Denshi serviceDaily Check List. No. Inspected Date. Inspected by. Location. Device Type. Date of PurchaseAppearance. Compartment. Power Supply. ECG Connectors. ECG Lead cable. Wireless Channel. Transmission. Function. Display Function. Periodic Check. CommentVisually check for any damage,Visually check for the ringVisually check for the contactVisually check the connectors ofVisually check each lead forVerify whether the transmittingTurn the power ON and makeTurn the power ON and verifyECG value and waveform. Check the date of the previousCriteria. Judgment. No abnormality should beNo damage, kink, floating,No deformation, cracks,With battery installed, the. LCD should turn ON. No damage, chip, andNo crack and damageMust match the wirelessWaveforms and valuesAll data should beShould be within oneThis section lists the accessories for the LX-7120.Denshi for the LX-7120.

Otherwise, the LX-7120 cannot deliver itsNo. Item. Model Type. Q’ty. Neck StrapAHA color code. Hook Type, Limb. Lead (2CH)The following accessories are available as optional for the LX-7120. PurchaseAHA color code. ItemECG Hook Type Lead CableRed). Limb Lead (1CH)Red, Green). Limb Lead (2CH)Red, Green, Brown),Red). Limb Lead (2CH)Red, Green, Brown),Standard Specification. Size:Weight. Approximately 85 grams (with battery). Transmitting. ECG 1CH or 2CH (selectable from the ECG lead. Waveform:Automatically detect the type after inserting the leadTransmitting Status. Electrode Off, Low Battery, Event Switch, Pacemaker. Data. Detection, Channel ID, 64group CodesWaterproof:DC: one (1) 1.5 V “AA” size (“LR06” size) alkalineContinuous Operating Approximately 6 days. Time:Electrode. Numbers of Input. Channel. Accuracy of SensitivityECG Input Impedance: 5M? and above. Common Mode Rejection Less than 10mVp-p (95dB and above). Ratio. Measurement. Display Coverage ofHeart Rate. FrequencyCharacteristic:Time Constant. Protection to. Defibrillation:Meet the requirement of IEC60601-2-27. Respiration (Impedance Method). Accuracy of Sensitivity:Display Coverage of Respiration Rate:0, 9 to 150Bpm. Display Error of Respiration Rate:Measured Current of Respiration. Below 100?A (at 42kHz). Transmission Method. Modulation Mode. Oscillation Method. Channel Spacing. Occupied Frequency. Bandwidth. RF output power. Transmitting Antenna. Digital, Frequency shift keyingPLL Synthesizer method by crystal controlECG lead cable. SafetyEMC Standard:Internally Powered EquipmentThe type of. Type CF Applied partOperating Environment. Temperature. Humidity:Comply with IEC60068-2-64:1987, IEC60068-2-32:1975,Humidity:The following displays are shown on the LCD of the LX-7120. Display. Starting Screen. Displays after turning on the power. Automatically moves onto the channelChannel Display. Screen.

Displays the transmitter channel afterAutomatically move onto the waveformAutomatically move onto the channelFor details about electrode checkDisplay. Error Message. Displays when the transmitter is faulty. Telemeter Error. EEPROM Error. Displays when the EERPROM is faulty.